efa inventory device snmp host
create
Creates an SNMP v2c or v3
host.
Syntax
efa inventory device snmp
host create
[--ip
device-ip | --host-ip
{
IPv4 | IPv6 |
FQDN
} |--community
community | --user
user
|
--version
{
v2c | v3
} | --notify-type
{
traps | informs
} | --engine-id remote_id
|--udpport
]
Parameters
- --community
community
- Specifies a community name.
Applicable for v2c only.
- --engine-id
remote_id
- Specifies the remote engine
ID of manager.
Hex string format with a colon as a separator. The string
size must be between 10-65. Example: 02:03:04:05:06.
- --host-ip
{
IPv4 | IPv6 |
FQDN
}
- Specifies a host IP
address.
- --ip
device-ip
- Specifies a comma-separated
range of device IP addresses. Example: 10.1.1.13,10.1.1.50,10.1.1.101.
- --notify-type
{
traps |
informs
}
- Specifies the notification
type. Informs are valid for v3 only.
-
--udpport
- Optional port number used to send notifications. Range: 0-65535, Default
value is 162.
- --user
user
- Specifies an SNMP v3
user.
- --version
{
v2c | v3
}
- Specifies the SNMP
version.
Usage Guidelines
The command creates an SNMP v2c or v3 host.
Engine-id and informs are applicable only for SNMP v3 hosts.
Examples
efa inventory device snmp host create --ip 10.139.44.153 --host-ip 1.1.1.1
--user user1 --version v3 --notify-type traps --udp-port 163
efa inventory device snmp host list --ip 10.139.44.153
